manualshive.com logo in svg

DigiDesign D-Show Profile, Manual

The DigiDesign D-Show Profile is a professional-grade audio mixing console designed for live performances and studio recording. This top-of-the-line product offers unparalleled sound quality and versatility. Easily access and optimize its advanced features with a comprehensive user manual available for free download at manualshive.com.

Share
Download
background image

D-Show Profile Guide

228

Repeated failures

An incompatible plug-in, a corrupted D-Show 
data file or application software, or a hard-
ware error.

Check to make sure you are using the most current versions 
of all your plug-ins (check with the manufacturers). If failures 
occur only when you try to use a certain plug-in, disable that 
plug-in and see if problems go away. Try re-installing plug-ins 
that are causing problems. 
Determine if a certain Show file causes the system to fail 
consistently. If so, delete that file and see if problems per-
sist. For additional options, see “Restarting D-Show” on 
page 231.
Clear the console from the Options > System Config page and 
see if problems persist.
If necessary, you can reinstall D-Show software (see “Updat-
ing or Re-Installing” on page 233). 
If you suspect problems with the FOH Rack hard drive, or the 
D-Show system software, you can do a complete restore (see 
“Full System Restore” on page 233). 
Power down all equipment and check all cards and cable con-
nections and power supplies. 

Plug-Ins

The plug-in racks need to 
be re-initialized

The racks have gone offline. The racks go 
offline whenever the backup personality is in 
effect, and after some conditions in which a 
plug-in or the DSP host failure causes signif-
icant problems. 

Follow the instructions on-screen to reset the racks (see 
“Re-Initializing the Plug-In Racks” on page 230). 

One or more plug-ins are 
unavailable

A Show was loaded that references plug-ins 
which are unavailable on the current system

Install the plug-ins, if available (see “Installing and Authoriz-
ing Plug-Ins” on page 145). 
Remove or replace the plug-ins in the Show, or load a differ-
ent Show file. 

A plug-in is not fully compatible with D-Show 
and is causing failures

Check all plug-ins to make sure you are using the most recent 
versions. Go to Options > Plug-Ins and click the plug-in to dis-
play the version number. 
Try disabling plug-ins one-by-one to see if doing so eliminates 
problems (see “Enabling and Disabling Installed Plug-Ins” on 
page 148). 

Plug-in authorization dia-
logs appear every time the 
system starts or restarts

A plug-in is installed that needs to be autho-
rized for demo or full use. 

Click Quit to dismiss the authorization dialog and continue 
starting up (the plug-in will be unavailable).
Click Try to use the plug-in for a limited time in Demo mode. 
Click Authorize if you are ready to authorize a plug-in using an 
iLok. (See “Installing and Authorizing Plug-Ins” on page 145.)

A plug-in demo has expired

Uninstall the plug-in listed in the authorization dialog (see 
“Removing Plug-Ins” on page 146). 

Error Messages

One or More Units have 
Failed

Bad or missing connection

Check all cables and connections. Make sure digital grade 
XLR cables are being used to connect Main Unit and all Side-
car units (original D-Show systems only). 
Check to make sure that the last Sidecar in the chain is prop-
erly terminated (original D-Show systems only).

A unit needs to be reset

Reset the component in Options > Devices. If necessary, 
restart D-Show. 

Plug-In Racks Need Reset

The racks have gone offline due to the 
backup personality being in effect, a plug-in 
has failed, or some circumstances have 
caused the DSP engines to require a reset. 

Follow the instructions on-screen to reset the racks (see 
“Re-Initializing the Plug-In Racks” on page 230). 

Table 29. Troubleshooting D-Show Errors and Messages

Symptom or Message

Possible Cause

Solution

Summary of Contents for D-Show Profile















































































































































































































































































Reviews:

No comments

Related manuals for D-Show Profile

Varimixer V20 Operation Manual preview
V20
Brand: Varimixer Pages: 32
Mackie 402VLZ4 Specifications preview
402VLZ4
Brand: Mackie Pages: 5
V3SOUND DESKTOP Quick Manual preview
DESKTOP
Brand: V3SOUND Pages: 8
Waring WDM 360 Instructions Manual preview
WDM 360
Brand: Waring Pages: 20
Yamaha MagicStomp Patch List preview
MagicStomp
Brand: Yamaha Pages: 2
KYOWA KW-4510 Instruction Manual preview
KW-4510
Brand: KYOWA Pages: 4
WAHL James Martin ZX867 Instructions Manual preview
ZX867
Brand: WAHL James Martin Pages: 12
Behringer VINTAGE DISTORTION VD1 Quick Start Manual preview
VINTAGE DISTORTION VD1
Brand: Behringer Pages: 2
Behringer SUPER PHASE SHIFTER SP400 Manual preview
SUPER PHASE SHIFTER SP400
Brand: Behringer Pages: 2
Hamilton Beach Eclectrics 63220 User Manual preview
Eclectrics 63220
Brand: Hamilton Beach Pages: 70
KitchenAid Heavy Duty 6 Instructions And Recipes Manual preview
Heavy Duty 6
Brand: KitchenAid Pages: 28
KitchenAid KHMB732 Manual preview
KHMB732
Brand: KitchenAid Pages: 36
KitchenAid 9KHM92 Instructions Manual preview
9KHM92
Brand: KitchenAid Pages: 28
KitchenAid KHM72 Series Instructions Manual preview
KHM72 Series
Brand: KitchenAid Pages: 48
KitchenAid K45SS - Classic - Stand Mixer Service Manual preview
K45SS - Classic - Stand Mixer
Brand: KitchenAid Pages: 32
KitchenAid K45SS - Classic - Stand Mixer Manual preview
K45SS - Classic - Stand Mixer
Brand: KitchenAid Pages: 60
KitchenAid KV25G0XCV - Caviar, Professional 5 User Manual preview
KV25G0XCV - Caviar, Professional 5
Brand: KitchenAid Pages: 88
Roland V-Mixer M-300 Brochure preview
V-Mixer M-300
Brand: Roland Pages: 8

Brands by name

Popular brands

Load more brands