manualshive.com logo in svg

DigiDesign D-Show Profile, Manual

Share
Download
DigiDesign D-Show Profile Manual Download Page 201

Chapter 21:  Snapshots

191

Removing a Plug-In from Snapshots

To remove a plug-in from snapshots from the Snapshots page:

1  

Select an individual snapshot, or create a multi-selection of 

snapshots in the Snapshots List.

2  

Click the Snapshots Plug-Ins icon to show the Snapshots 

Plug-Ins list. 

3  

Right-click a plug-in within the plug-in list of the currently 

targeted snapshot and choose Remove This Plug-In From Se-
lected Snapshots.

To remove a plug-in from multiple snapshots from the Plug-Ins 
page:

1  

Create a multi-selection of snapshots on the Snapshots page

2  

Go to the Plug-Ins page. 

3  

Click the Snapshot menu for the plug-in to be removed and 

choose Remove This Plug-In From Selected Snapshots. 

The selected plug-in is removed from the currently targeted 
snapshot, as well as all other snapshots within the multi-selec-
tion. Only snapshots within the multi-selection that contain 
the selected plug-in are affected. 

Updating a Plug-In Across Multiple 
Snapshots

To update a plug-in across snapshots from the Snapshots page:

1  

Select an individual snapshot, or create a multi-selection of 

snapshots on the Snapshots page

2  

Select a plug-in within the plug-in list of the currently tar-

geted snapshot 

3  

Right-click and choose Update Plug-In In Selected Snap-

shots.

To update a plug-in across multiple snapshots from the Plug-Ins 
page:

1  

Create a multi-selection of snapshots on the Snapshots page

2  

Go to the Plug-Ins page. All plug-ins that are associated with 

any of the currently selected snapshots are identifiable by 
their red Snapshot menu. 

3  

Click the Snapshots menu for the plug-in to be updated and 

choose Update This Plug-In In Selected Snapshots.

The selected plug-in is updated within the currently targeted 
snapshot, as well as all other snapshots within the multi-selec-
tion. Snapshots within the multi-selection that do not already 
contain the plug-in being added are unaffected. 

Editing Plug-Ins

The Snapshot page provides two ways to quickly navigate to a 
plug-in in order to edit its routing assignment or parameters. 

To edit a plug-in associated with a snapshot: 

■

Double-click the item in the Snapshot Plug-Ins list. Or, 

Right-click a plug-in in the Snapshots Plug-Ins list and choose 
Edit Plug-In. 

Snapshot Options

Crossfade Time

You can set the X-fade (crossfade) time for the channel faders 
between snapshots from 0–99.9 seconds, in 0.1 second incre-
ments. This value determines the 

fade time

, or the time it takes 

for the faders to move to their new positions when a snapshot 
is recalled. 

All other controls are unaffected by the crossfade time, and are 
updated instantly when a snapshot is recalled. Each snapshot 
may be assigned its own crossfade time. In addition, cross-
fades will continue through a subsequent snapshot recall as 
long as the crossfading channels are not scoped in the incom-
ing snapshot. 

Default Crossfade Time

The default crossfade time assigned to new snapshots can be 
set with this option, with a possible range of 0–99.9 seconds.

To set the Default Crossfade Time:

1  

Go to the Options page and click the Snapshot tab.

2  

Under Snapshot General Preferences, enter a value or drag 

in the text box and press Enter. 

Snapshots plug-ins pop-up menu with multiple plug-ins selected in the 
Snapshots page

Setting the Default Crossfade Time

Summary of Contents for D-Show Profile















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands