Dell SMA 200 Administration Manual Download Page 474

Page: 474 / 514

Dell SonicWALL Secure Mobile Access 8.5

Administration Guide

474

Power Supply

SRA 1600: Internal, 100-240Vac, 50-60Mhz

SRA 4600: Internal, 100-240Vac, 50-60Mhz

Max Power Consumption

SRA 1600: 47 W

SRA 4600: 50 W

Total Heat Dissipation

SRA 1600: 158 BTU

SRA 4600: 171 BTU

Dimensions

SRA 1600: 17.00 x 10.13 x 1.75 in (43.18 x 25.73 x 4.45 cm)

SRA 4600: 17.00 x 10.13 x 1.75 in (43.18 x 25.73 x 4.45 cm)

Weight

SRA 1600: 9.5 lbs (4.3 kg)

SRA 4600: 9.5 lbs (4.3 kg)

Major Regulatory Compliance

SRA 1600/4600:

FCC Class A, EMI/EMC, FCC, CE, VCCI Class A, UL, cUL, TUV/GS, CB

Environment

Temperature:

SRA 1600/4600: 32-105ª F, 0-40ª C

Relative Humidity:

SRA 1600/4600: 5-95 percent RH non-condensing

MTBF

SRA 1600: 18.3 years

SRA 4600: 17.8 years

3 What are the SMA 500v Virtual Appliance virtualized environment requirements?

Hypervisor: VMWare ESXi (version 5.0 and newer)

Appliance size (on disk): 2 GB

Allocated memory: 2 GB

4 Do the SMA/SRA appliances have hardware-based SSL acceleration onboard?

Answer

: The SRA 4600 and SRA 1600 do not have a hardware-based SSL accelerator processor, however,

the SMA 400/200 processor includes AES NI instructions to accelerate AES encryption.

5 What operating system do the SMA/SRA appliances run?

Answer:

The appliance runs Dell SonicWALL’s own hardened Linux distribution.

6 Can I put multiple SMA/SRA appliances behind a load-balancer?

Answer:

Yes, this should work fine as long as the load-balancer or content-switch is capable of tracking

sessions based upon SSL Session ID persistence, or cookie-based persistence.

NOTE:

The SMA 500v Virtual Appliance is not supported on VMware ESXi 4.0 and 4.1. If you deploy

the Virtual Appliance on one of these ESXi versions, it should still work, but you might see some
warning messages.

Summary of Contents for SMA 200



































































































































































































































































































































































































































































































































Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands

Dell SMA 200, Administration Manual

Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands