Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
87
Before You Register
Verify that the time, DNS, and default route settings on your SMA/SRA appliance are correct before you register
your appliance. These settings are generally configured during the initial SMA/SRA appliance setup process. To
verify or configure the time settings, navigate to the
System > Time
page. To verify or configure the DNS
setting, navigate to the
Network > DNS
page. To verify or configure the default route, navigate to the
Network > Routes
page. For more information about time and DNS setting configuration, refer to
Configuring DNS Settings on page 125 and Configuring a Default Route for the SMA/SRA
Creating a MySonicWALL Account from System > Licenses
1 On the
System > Licenses
page, click
Activate, Upgrade, or Renew services
. The License
Management page is displayed.
2 If you do not have a MySonicWALL account or if you forgot your user name or password, click the
https://www.mysonicwall.com
link at the bottom of the page. The
MySonicWALL User Login
page is
displayed.
Do one of the following:
•
If you forgot your user name, click the
Forgot Username?
link.
•
If you forgot your password, click the
Forgot Password?
link.
•
If you do not have a MySonicWALL account, click the
Not a registered user?
link.
3 Follow the instructions to activate your MySonicWALL account.
Registering with MySonicWALL
There are two ways to register your SMA/SRA appliance:
•
Log in to your MySonicWALL account directly from a browser or click the
Dell SonicWALL
link on the
System > Status
page to access MySonicWALL, enter the appliance serial number and other information
there, and then enter the resulting registration code into the field on the
System > Status
page. This
manual registration procedure is described in this section.
•
Use the link on the
System > Licenses
page to access MySonicWALL, then enter the serial number and
other information into MySonicWALL. When finished, your view of the
System > Licenses
page shows
that the appliance has been automatically synchronized with the licenses activated on MySonicWALL.
This procedure is described in
Registering the SMA/SRA Appliance with System > Licenses
.
To register your SMA/SRA appliance:
1 If you are not logged into the Secure Mobile Access management interface, log in with the username
admin
and the administrative password you set during initial setup of your SMA/SRA appliance (the
default is
password
). For information about configuring the administrative password, refer to the
Getting Started Guide for your appliance model.
2 If the
System > Status
page is not automatically displayed in the Secure Mobile Access management
interface, click
System
in the left-navigation menu, and then click
Status
.
3 Record your
Serial Number
and
Authentication Code
from the
Licenses & Registration
section.
4 Do one of the following to access the MySonicWALL Web page:
•
Click the
Dell SonicWALL
link in the
Licenses & Registration
section.
•
into the Address or Location field of your Web browser.
NOTE:
You need a MySonicWALL account to register the Dell SonicWALL SMA/SRA appliance.
