Dell SMA 200 Administration Manual Download Page 411

Page: 411 / 514

Dell SonicWALL Secure Mobile Access 8.5

Administration Guide

411

• Smart

: Allows the firmware to decide which mode to launch on the client.

When creating a new unified bookmark,

Smart

is selected by default. Auto-detection is processed

using bookmark-specific default modes while launching the bookmark.

• Manual

: Provides options to configure the modes, their priorities, and the choose method. At

least one mode should be enabled in the selection box.

The launch sequence is as follows:

HTML5

Native

, and

ActiveX

. Selecting Manual allows you to

change, enable, or disable the launch methods. If you select

Native

to launch the Citrix

bookmark, then the SMA Connect Agent launches the Citrix Receiver on the local machine to do
the Citrix connection.

The

and

down

arrows are used to adjust the launch priority. Fork and tick are used to disable

or enable the modes. Disabled modes are put at the bottom of the list with a gray font color.

The

Choose during Launch

option is not enabled by default under the

Manual

mode. In this

setting, while launching the bookmark, the first available mode in the configured list is run at
once after auto-detection.

After the

Choose during Launch

option is enabled, while launching the unified bookmark, if

there are multiple modes available for the client, a menu is provided from which you can choose

Summary of Contents for SMA 200



































































































































































































































































































































































































































































































































Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands

Dell SMA 200, Administration Manual

Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands