Dell SMA 200 Administration Manual Download Page 169

Page: 169 / 514

Dell SonicWALL Secure Mobile Access 8.5

Administration Guide

169

13 Next, select the proxy authentication setting from the drop-down list. If Secure Mobile Access

authentication is enabled, select

Basic Authentication

14 Click

to save the configuration, and then exit out of Microsoft Outlook.

15 Open Microsoft Outlook to start a new session. Log messages are generated when the Outlook Anywhere

portal is accessed.

Portals > Domains

This section provides an overview of the

Portals > Domains

page and a description of the configuration tasks

available on this page.

•

Portals > Domains Overview

on page

169

•

Viewing the Domains Table

•

•

Adding or Editing a Domain with Local User Authentication

on page

172

•

Adding or Editing a Domain with Active Directory Authentication

on page

174

•

Adding or Editing a Domain with LDAP Authentication

on page

177

•

Adding or Editing a Domain with RADIUS Authentication

on page

180

•

Adding or Editing a Domain with Digital Certificates

on page

183

Portals > Domains Overview

The

Portals > Domains

page allows the administrator to add and configure a domain, including settings for:

•

Authentication type (local user database, Active Directory, LDAP, or RADIUS)

•

Domain name

•

Portal name

•

Group (AD, RADIUS) or multiple Organizational Unit (LDAP) support (optional)

NOTE:

If Authentication Control of the Secure Mobile Access portal is enabled, only Basic Authentication

can be supported. Be sure to select

Basic Authentication

on the Exchange server for Outlook Anywhere. If

Authentication Control of Secure Mobile Access is disabled, other authentication methods are supported.

NOTE:

To provide better protection for the Exchange Server, anonymous Outlook Anywhere access is not

supported.

Summary of Contents for SMA 200



































































































































































































































































































































































































































































































































Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands

Dell SMA 200, Administration Manual

Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands