Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
424
Configuring the Mail Server
In order to receive notification email and to enable to the One Time Password feature, it is imperative that you
configure the mail server from the
Log > Settings
page. If you fail to configure your mail server prior to using
the One Time Password feature, you will receive an error message:
For information about configuring the One Time Password feature, refer to
To configure the mail server:
1 Log in to the Secure Mobile Access management interface using administrator credentials.
2 Navigate to
Log > Settings
.
3 Type the email address where you want logs sent to in the
Email Events Logs to
field.
4 Type the email address where you want alerts sent to in the
Email Alerts to
field.
5 Type the IP address for the mail server you are using in the
Mail Server
field.
6 Type the email address for outgoing mail from your SMA/SRA appliance in the
Mail From Address
field.
7 Click
Accept
in the upper right corner.
Log > Categories
This section provides an overview of the
Log > Categories
page and a description of the various categories of
event messages that can be viewed in the log. This page allows for each category to be enabled or disabled by