Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
248
conforming to previous policies for the initial connection. Configuration is allowed globally, by group, or
per user.
•
In the
Allow client to use Fingerprint Authentication on Android devices
, the control only blocks
future attempts to log in with fingerprint technology on Android devices when the option is disabled as
there is no method for the server to change the client settings until the client attempts a connection. So
in some cases, a client might not be conforming to previous policies for the initial connection.
Configuration is allowed globally, by group, or per user.
To have the user inherent the NetExtender settings from the global NetExtender settings, select
Use Global
Settings
for any of the previous options.
Configuring Group NetExtender Routes
To configure NetExtender client routes:
1 To add a NetExtender client route that is only added to this user, click the
Nx Routes
tab in the
Edit
User Settings
window.
2 To add a NetExtender client route that is only added to users in this group, click
Add Client Route
.
3 Type the IPv4 or IPv6 address of the trusted network to which you would like to provide access with
NetExtender in the
Destination Network
field.
4 For an IPv4 route, type the subnet mask in the
Subnet Mask/Prefix
field. For an IPv6 route, type the
prefix in the
Subnet Mask/Prefix
field.
5 Click
Add
. Repeat this procedure for all necessary routes.
6 Select
Enabled
from the
Tunnel All Mode
drop-down list to force all traffic for this user—including
traffic destined to the remote users’ local network—over the Secure Mobile Access NetExtender tunnel.
7 To also add the global NetExtender client routes (which are configured on
NetExtender
>
Client Routes
page) to users in this group, select
Add Global NetExtender Client Routes
.
8 Click
Accept
.
