Dell PowerVault MD3060e Series, Cli Manual

Page: 106 / 226

Syntax
create diskGroup
physicalDisks=( enclosureID1,drawerID1,slotID1
enclosureID2,slotID2... enclosureIDn,drawerIDn,slotIDn )
raidLevel=(0 | 1 | 5 | 6)
userLabel=” diskGroupName ”
[driveMediaType=(HDD | SSD | unknown | allMedia)
capacity= virtualDiskCapacity
owner=(0 | 1)
cacheReadPrefetch=(TRUE | FALSE)
segmentSize= segmentSizeValue
usageHint=(fileSystem | dataBase | multiMedia)
enclosureLossProtect=(TRUE | FALSE)
drawerLossProtect=(TRUE | FALSE)
securityType=(none | capable | enabled)]
Parameters
Parameter Description
physicalDisks The physical disks that you want to assign to the disk group that you want
to create. Specify the enclosure ID value and the slot ID value for each
physical disk that you assign to the disk group. Enclosure ID values are
0
to
99
. Drawer ID values are
0
to
4
. Slot ID values are
0
to
31
. Enclose the
enclosure ID values and the slot ID values in parentheses.
raidLevel The RAID level of the disk group that contains the virtual disk. Valid values
are
0
,
1
,
5
, or
6
.
userLabel The alphanumeric identifier (including - and _) that you want to give the
new disk group. Enclose the disk group identifier in double quotation
marks (“ ”).
driveMediaType The type of physical disk media that you want to use for the disk group.
Valid physical disk media consists of:
• HDD — Use this option when you have hard disk drives in the
expansion enclosure.
• SSD — Use this option when you have solid state physical disks in
the expansion enclosure.
• unknown —Use if you are not sure what types of physical disk
media are in the expansion enclosure.
• allMedia — Use this option when you want to use all types of
physical disk media that are in the expansion enclosure.
physicalDiskType The type of physical disk that you want to use in the virtual disk. You
cannot mix physical disk types. The valid physical disk type is SAS. You
must specify a physical disk type.
capacity The size of the virtual disk that you are adding to the storage array. Size is
defined in units of bytes,
KB
,
MB
,
GB
, or
TB
. The following examples show
the syntax:
capacity=500 bytes
capacity=2 GB
106