Dell PowerVault MD3060e Series, Cli Manual

Page: 174 / 226

Parameter Description
NOTE: Use the
optimal
parameter to move a
degraded channel back to the Optimal state. Use the
degraded
parameter if the channel is experiencing
problems, and the storage array requires additional
time for data transfers.
Set Physical Disk Hot Spare
This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [ enclosureID,slotID ] |
physicalDisks [ enclosureID1,slotID1 enclosureID2, slotID2...
enclosureIDn,slotIDn ])
hotSpare=(TRUE | FALSE)
Parameters
Parameter Description
physicalDisk or physicalDisks The enclosure and the slot where the physical disk
resides. Enclosure ID values are
0
to
99
. Slot ID values
are
0
to
31
. Enclose the enclosure ID values and the slot
ID values in square brackets ([ ]).
hotSpare The setting to assign the physical disk as the hot spare. To
assign the physical disk as the hot spare, set this
parameter to
TRUE
. To remove a hot spare assignment
from a physical disk, set this parameter to
FALSE
.
Set Physical Disk State
This command sets a physical disk to the Failed state. (To return a physical disk to the optimal state, use the revive
physicalDisk
command.)
Syntax
set (physicalDisk [ enclosureID,slotID ] |
physicalDisks [ enclosureID1,slotID1 enclosureID2, slotID2...
enclosureIDn,slotIDn ])
operationalState=failed
Parameter
Parameter Description
physicalDisk or physicalDisks The enclosure and the slot where the physical disk
resides. Enclosure ID values are
0
to
99
. Slot ID values
are
0
to
31
. Enclose the enclosure ID values and the slot
ID values in square brackets ([ ]).
174