Dell PowerVault MD3060e Series, Cli Manual

Page: 167 / 226

Set Disk Group Forced State
This command moves a disk group into a Forced state. Use this command if the
start diskGroup import
command does not move the disk group to an Imported state or if the import operation does not work because of
hardware errors. In a Forced state, the disk group can be imported, and you can then identify the hardware errors.
Syntax
set diskGroup [ diskGroupName ] forcedState
Parameter
Parameter Description
diskGroup Sequence number of the disk group for which to set
properties. You must put brackets ([ ]) around the disk
group number.
NOTE: You can move the physical disks that comprise a disk group from one storage array to another storage
array. The CLI provides three commands that let you move the physical disks. The commands are
start
diskGroup export
,
start diskGroup import
, and
set diskGroup forcedState
. In the
Forced state, you can perform an import operation on the disk group.
Set Disk Pool
This command sets the attributes associated with a disk pool based on the specified parameters.
Syntax
set diskPool
(diskPool=[ diskPoolName ] | diskPools=[ diskPoolName1... diskPoolNamen ] |
allDiskPools)
[reservePhysicalDiskCount= reservePhysicalDiskCountValue |
warningThreshold=(warningThresholdValue | default) |
criticalThreshold=(criticalThresholdValue | default) |
criticalPriority=(highest|high|medium|low|lowest) |
backgroundPriority=(highest|high|medium|low|lowest) |
degradedPriority=(highest|high|medium|low|lowest)
userLabel= diskPoolName ]
Parameters
Parameter Description
diskPools The list of
diskPoolNames
identifies multiple physical disk
pool which have their parameters reset by the command.
allDiskPools This parameter specifies that all physical disk pools have
their parameters reset by the command.
reservePhysicalDiskCount This value is specified in terms of the number of physical
disks to reserve in the disk pool for physical disk failures
or physical disk removals.
warningThreshold The percentage of disk pool capacity at which you receive
a warning alert that the disk pool is nearing full capacity.
Use integer values. For example, a value of
70
means 70
167