Dell PowerVault MD3060e Series, Cli Manual

Page: 123 / 226

userLabel=” snapshotVirtualDiskName ”
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryUserLabel=” repositoryName ”
repositoryFullPolicy=(failSourceWrites |
failSnapshot)
|enableSchedule=(TRUE | FALSE)|schedule=(immediate
| snapshotSchedule )
Syntax (Existing Repository Disk Group)
create snapshotVirtualDisk
sourceVirtualDisk=” sourceVirtualDiskName ”
[repositoryDiskGroup=” repositoryDiskGroupName ”
repositoryUserLabel=” repositoryName ”
freeCapacityArea= freeCapacityIndexNumber
userLabel=” snapshotVirtualDiskName ”
warningThresholdPercent= percentValue
repositoryPercentOfSource= percentValue
repositoryFullPolicy=(failSourceWrites |
failSnapshot)]
|enableSchedule=(TRUE | FALSE)|schedule=(immediate
| snapshotSchedule )
Parameters
Parameter Description
sourceVirtualDisk Name of the source virtual disk from which to take a
snapshot. You must put quotation marks (" ") around the
source virtual disk name.
repositoryRAIDLevel RAID level for the repository virtual disk. Valid values are
0
,
1
,
5
, or
6
.
repositoryPhysicalDisks Specifies the physical disks to assign to the repository.
Specify the enclosure ID and slot ID for each physical disk
assigned to the virtual disk. Enclosure ID values are
0
to
99
. Slot ID values are
0
to
31
. You must put parentheses
around the list of repository physical disks.
repositoryDriveCount Number of unassigned physical disks to use for the
repository virtual disk.
repositoryDiskGroupUserLabel Use this parameter when you create a new disk group.
The name of a new disk group to be used for the
repository virtual disk. Enclose the repository disk group
name in double quotation marks (“ ”).
repositoryDiskGroup Sequence number of the disk group where the repository
virtual disk is located.
userLabel The name to give the snapshot virtual disk. You must put
quotation marks (" ") around the snapshot virtual disk
name.
enclosureLossProtect Specifies that enclosure loss protection is enforced when
creating the repository. To enforce enclosure loss
protection, set this parameter to
TRUE
. The default setting
is
FALSE
. For information about the
123