Dell PowerVault MD3060e Series, Cli Manual, Page: 29 / 226

Recurring Syntax Syntax Value
nvsram-bit-setting nvsram-mask, nvsram-value
(0x hexadecimal, 0x hexadecimal | integer-literal)
ipv4-address (0–255).(0–255).(0–255).(0–255)
ipv6-address (0-FFFF):(0-FFFF):(0-FFFF):
(0-FFFF):(0-FFFF):(0-FFFF):
(0-FFFF):(0-FFF)
autoconfigure-vols-attr-value-list
autoconfigure-vols-attr-value-pair
{
autoconfigure-vols-attr-value-pair
}
autoconfigure-vols-attr-value-pair physicalDiskType=physical disk-type|
raidLevel=raid-level |
diskGroupWidth=integer-literal |
diskGroupCount=integer-literal |
virtualDisksPerGroupCount=
integerliteral |
hotSpareCount=
integer-literal
|
segmentSize= segment-size-spec
NOTE: The
physicalDiskType
parameter is not
required if only one type of physical disk is in the
storage array. If you use the
physicalDiskType
parameter, you must also use the
hotSpareCount
and
diskGroupWidth
parameters. If you do not use the
physicalDiskType
parameter, the configuration
defaults to SAS physical disks.
NOTE: The
virtualDisksPerGroupCount
parameter is
the number of equalcapacity virtual disks per disk
group.
create-virtual-disk-copy-attr-value-list create-virtual-disk-copy-attr-value-pair
{
create-virtual-disk-copy-attr-value-pair
}
create-virtual-disk-copy-attr-value-pair copyPriority=highest | high | medium | low | lowest |
targetReadOnlyEnabled=boolean
recover-raid-virtual-disk-attr-value-list recover-raid-virtual-disk-attr-value-pair
{
recover-raid-virtual-disk-attr-value-pair }
recover-raid-virtual-disk-attr-value-pair owner=(0 | 1)
Table 8. Range of Values for Recurring Syntax Elements
Recurring Syntax Syntax Values
IPV4Priority 0 to 7
IPV4VlanID 1 to 4094
IPV6Priority 0 to 7
IPV6VlanID 1 to 4094
29