manualshive.com logo in svg

Dell PowerVault MD3060e Series, Cli Manual

The Dell PowerVault MD3060e Series is a high-performance storage solution designed for businesses seeking reliable data storage capabilities. To maximize its potential, it is crucial to have comprehensive knowledge about its hardware and software operations. Users can easily access the free hardware and software manual for the Dell PowerVault MD3060e Series, available for download at manualshive.com.

Share
Download
background image

Parameter

Description

has special characters, you also must enclose the virtual 

disk name in double quotation marks (" ").

Remove Virtual Disk Copy

This command removes a virtual disk copy pair.
Syntax

remove virtualDiskCopy target [

targetName

] 

[source [

sourceName

]]

copyType=(online | offline)

Parameters

Parameter

Description

target

Name of the target virtual disk to remove. You must put 

brackets ([ ]) around the target virtual disk name. If the 

target virtual disk name has special characters, you must 

also put quotation marks (" ") around the target virtual disk 

name.

source

Name of the source virtual disk to remove. You must put 

brackets ([ ]) around the source virtual disk name. If the 

source virtual disk name has special characters, you must 

also put quotation marks (" ") around the source virtual 

disk name.

copyType

Identifies a virtual disk copy with a snapshot. If the virtual 

disk copy has an online copy snapshot, set this parameter 

to 

online

. If the virtual disk copy does not have a 

snapshot, set this parameter to 

offline

.

Remove Virtual Disk LUN Mapping

This command removes the logical unit number (LUN) mapping.
Syntax

remove (allVirtualDisks | virtualDisk

["

virtualDiskName

"] |

virtualDisks ["

virtualDiskName1

" ...

"

virtualDiskNamen

"] | accessVirtualDisk)

lunMapping (host="

hostName

" | hostGroup=

"

hostGroupName

")

Parameters

Parameter

Description

allVirtualDisks

Removes the LUN mapping from all virtual disks.

virtualDisk

 or 

virtualDisks

Name of the specific virtual disk to remove from the LUN 
mapping. You can enter more than one virtual disk name. 
You must put quotation marks (" ") and brackets ([ ]) around 
the virtual disk name. The virtual disk name and quotation 
marks must be inside the brackets.

151

Summary of Contents for PowerVault MD3060e Series



































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3060e Series

Mercury SmartCraft SC5000 Operation Manual preview
SmartCraft SC5000
Brand: Mercury Pages: 64
IBM IntelliStation 6866 Hardware Maintenance Manual preview
IntelliStation 6866
Brand: IBM Pages: 148
Advantech UNO-3072A User Manual preview
UNO-3072A
Brand: Advantech Pages: 84
Commodore PC 10-1 Service Manual preview
PC 10-1
Brand: Commodore Pages: 23
Contec 955 Series User Manual preview
955 Series
Brand: Contec Pages: 116
Sony PCV-W20 Marketing s Specifications preview
PCV-W20 Marketing s
Brand: Sony Pages: 1
Sony PCV-V300G VAIO User Guide (primary manual) Specifications preview
PCV-V300G VAIO User Guide (primary manual)
Brand: Sony Pages: 1
Sony PCV-W30 VAIO User Guide (primary manual) Manual preview
PCV-W30 VAIO User Guide (primary manual)
Brand: Sony Pages: 74
Sony PCV-W20 - VAIO - 512 MB RAM Online Help Manual preview
PCV-W20 - VAIO - 512 MB RAM
Brand: Sony Pages: 103
Sony PCV-V300G VAIO User Guide (primary manual) User Manual preview
PCV-V300G VAIO User Guide (primary manual)
Brand: Sony Pages: 209
Sony PCV-J200 - Vaio Desktop Computer Specifications preview
PCV-J200 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-J120 - Vaio Desktop Computer Specifications preview
PCV-J120 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-J100 - Vaio Desktop Computer Specifications preview
PCV-J100 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-J120 - Vaio Desktop Computer Service Manual preview
PCV-J120 - Vaio Desktop Computer
Brand: Sony Pages: 24
Sony PCV-J200 - Vaio Desktop Computer Service Manual preview
PCV-J200 - Vaio Desktop Computer
Brand: Sony Pages: 29
Sony PCV-J150 - Vaio Desktop Computer Service Manual preview
PCV-J150 - Vaio Desktop Computer
Brand: Sony Pages: 27
Sony PCV-L400 - Vaio Slimtop Computer Service Manual preview
PCV-L400 - Vaio Slimtop Computer
Brand: Sony Pages: 35
Sony PCV-E314DS - Vaio Digital Studio Desktop Computer Service Manual preview
PCV-E314DS - Vaio Digital Studio Desktop Computer
Brand: Sony Pages: 33

Brands by name

Popular brands

Load more brands