manualshive.com logo in svg

Dell PowerVault MD3060e Series, Cli Manual

The Dell PowerVault MD3060e Series is a high-performance storage solution designed for businesses seeking reliable data storage capabilities. To maximize its potential, it is crucial to have comprehensive knowledge about its hardware and software operations. Users can easily access the free hardware and software manual for the Dell PowerVault MD3060e Series, available for download at manualshive.com.

Share
Download
background image

Table 10. Snapshot Virtual Disk Commands

Command

Description

create snapshotVirtualDisk

Creates a snapshot virtual disk.

re-create snapshot

Starts a fresh copy-on-write operation by using an 
existing snapshot virtual disk.

set (snapshotVirtualDisk)

Defines the properties for a snapshot virtual disk and 
enables you to rename a snapshot virtual disk.

stop snapshot

Stops a copy-on-write operation.

Using Host Servers To Create An Initial Snapshot Virtual Disk

CAUTION: Before using the Snapshot Virtual Disks Premium Feature in a Microsoft Windows clustered 
configuration, you must first map the snapshot virtual disk to the cluster node that owns the source virtual disk. 
This ensures that the cluster nodes correctly recognize the snapshot virtual disk.
If you map the snapshot virtual disk to the node that does not own the source virtual disk before the snapshot 
enabling process is completed, the operating system may fail to correctly identify the snapshot virtual disk. This 
can result in data loss on the source virtual disk or an inaccessible snapshot.
For details on mapping the snapshot virtual disk to the secondary node, see the Dell PowerVault MD3200 and 
MD3220 Storage Arrays With Microsoft Windows Server Failover Clusters or 

Dell PowerVault MD3200i and 

MD3220i Storage Arrays With Microsoft Windows Server Failover Clusters

 at support.dell.com/manuals.

NOTE: You can create concurrent snapshots of a source virtual disk on both the source disk group and on another 
disk group.

Before creating a Snapshot Virtual Disk, note the following:

•

The following types of virtual disks are not valid source virtual disks: snapshot repository virtual disks, snapshot 

virtual disks, target virtual disks that are participating in a virtual disk copy.

•

You cannot create a snapshot of a virtual disk that contains unreadable sectors.

•

You must satisfy the requirements of your host operating system for creating snapshot virtual disks. Failure to 

meet the requirements of your host operating system results in an inaccurate point-in-time image of the source 

virtual disk or the target virtual disk in a virtual disk copy.

Creating A Snapshot Virtual Disk

The 

create snapshotVirtualDisk

 command provides three methods for defining the physical disks for your 

snapshot repository virtual disk:

•

Define each physical disk for the snapshot repository virtual disk by enclosure ID and slot ID.

•

Define a disk group in which the snapshot repository virtual disk resides. Optionally define the capacity of the 

repository virtual disk.

•

Define the number of physical disks, but not specific physical disks, for the repository virtual disk.

When using the 

create snapshotVirtualDisk

 command to create a snapshot virtual disk, the standard virtual 

disk name for the source virtual disk is the minimum information required. When you provide only the standard virtual 
disk name, the storage management software provides default values for the other required property parameters for a 
snapshot virtual disk.

46

Summary of Contents for PowerVault MD3060e Series



































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3060e Series

Panasonic ToughBook CF-72 Series Supplementary Instructions Manual preview
ToughBook CF-72 Series
Brand: Panasonic Pages: 8
Panasonic Toughbook CF-H2 Operating Instruction preview
Toughbook CF-H2
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-H1CSLFZ6M Reference Manual preview
Toughbook CF-H1CSLFZ6M
Brand: Panasonic Pages: 106
DIVERSIFIED WOODCRAFTS 2810K Series Assembly Instructions Manual preview
2810K Series
Brand: DIVERSIFIED WOODCRAFTS Pages: 18
IBM PC 300 GL Type 6272 Installation Manual preview
PC 300 GL Type 6272
Brand: IBM Pages: 94
dellonda DH64 Manual preview
DH64
Brand: dellonda Pages: 6
Gateway GT3022b Update preview
GT3022b
Brand: Gateway Pages: 1
Fujitsu ESPRIMO G558 Operating Manual preview
ESPRIMO G558
Brand: Fujitsu Pages: 38
Fujitsu ESPRIMO C710 Specifications preview
ESPRIMO C710
Brand: Fujitsu Pages: 9
Fujitsu ESPRIMO C720 Datasheet preview
ESPRIMO C720
Brand: Fujitsu Pages: 10
Fujitsu Esprimo E5 Series Operating Manual preview
Esprimo E5 Series
Brand: Fujitsu Pages: 73
Fujitsu DESKPOWER N300 Series User Manual preview
DESKPOWER N300 Series
Brand: Fujitsu Pages: 61
Fujitsu DESKPOWER P301 User Manual preview
DESKPOWER P301
Brand: Fujitsu Pages: 56
Fujitsu DESKPOWER E623 User Manual preview
DESKPOWER E623
Brand: Fujitsu Pages: 50
Fujitsu ESPRIMO D5 Series Operating Manual preview
ESPRIMO D5 Series
Brand: Fujitsu Pages: 83
Fujitsu ESPRIMO E420 E85+ Datasheet preview
ESPRIMO E420 E85+
Brand: Fujitsu Pages: 8
Fujitsu DESKPOWER P321 User Manual preview
DESKPOWER P321
Brand: Fujitsu Pages: 54
Fujitsu Esprimo C series Operating Manual preview
Esprimo C series
Brand: Fujitsu Pages: 58

Brands by name

Popular brands

Load more brands