Dell PowerVault MD3060e Series, Cli Manual, Page: 16 / 226

Parameter Definition
•
eventOnly
— Only event information is
included in the e-mail.
•
profile
— Event and array profile information is
included in the e-mail.
•
supportBundle
— Event and support bundle
information is included in the e-mail.
NOTE: You can enter only one information argument
each time you execute the command. If you want all
of the information, you must run the command three
times.
-i Use with the
-d
parameter to display the IP address of the
known storage arrays.
-m Use to specify the host name or IP address of the e-mail
server from which to send e-mail alert notifications.
-n Use to specify the name of the storage array on which to
run the script commands. This name is optional when you
use
host
‑
name-or-IP-address
; however, if you are
using the in-band method for managing the storage array,
you must use the
-n
parameter if more than one storage
array is connected to the host at the specified address.
The storage array name is required when
host
‑
name-
or-IP-address
is not used; however, the name of the
storage array configured for use in the MD Storage
Manager GUI (that is, listed in the configuration file) must
not be a duplicate name of any other configured storage
array.
-o Use with the
-c
or
-f
parameter to specify a file name for
all output text that is a result of running the script
commands.
-p Use to specify the password for the storage array on
which to run commands. A password is not necessary
under the following conditions:
• A password has not been set on the storage array.
• The password is specified in a script file that is
running.
• The storage array password is specified by using
the
-c
parameter and the
set session
password=
password
command.
-q Use to specify how frequently to include additional profile
or support bundle information in the e-mail alert
notifications. An e-mail alert notification that contains at
least the basic event information is always generated for
every critical event. If you set the
-I
parameter to
eventOnly
, the only valid argument for
-q
is
16