Dell PowerVault MD3060e Series, Cli Manual

Page: 124 / 226

Parameter Description
enclosureLossProtect
parameter, see Enclosure
Loss Protection
driveMediaType The type of physical disk media that you want to use for
the disk group. Valid physical disk media consists of:
•
HDD
—Use this option when you have hard
physical disks in the expansion enclosure.
•
SSD
—Use this option when you have solid state
physical disks in the expansion enclosure.
•
unknown
—Use if you are not sure what types of
physical disk media are in the expansion
enclosure.
•
allMedia
—Use this option when you want to
use all types of physical disk media that are in the
expansion enclosure.
physicalDiskType The type of physical disks that you want to use for the
snapshot repository virtual disk. The valid physical disk
type is
SAS
. You must specify a physical disk type. Use
this parameter only when you use the
repositoryDriveCount
parameter.
freeCapacityArea The index number of the free space in an existing disk
group to use to create the snapshot repository virtual disk.
Free capacity is defined as the free capacity between
existing virtual disks in a disk group. For example, a disk
group might have the following areas: virtual disk 1, free
capacity, virtual disk 2, free capacity, virtual disk 3, free
capacity. To use the free capacity following virtual disk 2,
you specify:
freeCapacityArea=2
Use the
show diskGroup
command to determine if
free capacity area exists.
NOTE: If you do not specify the unconfigured or free
space, the repository virtual disk is placed in the
same disk group as the source virtual disk. If the disk
group where the source virtual disk resides does not
have enough space, this command fails.
warningThresholdPercent The percentage of repository capacity at which you
receive a warning that the repository is nearing full. Use
integer values. For example, a value of
70
means 70
percent. The default value is
50
.
repositoryPercentOfSource The size of the repository virtual disk as a percentage of
the source virtual disk. Use integer values. For example, a
value of
40
means 40 percent. The default value is
20
.
124