Dell PowerVault MD3060e Series, Cli Manual, Page: 196 / 226

Parameter Description
physicalDiskChannel Identifier number of the physical disk port for which to
display information. Valid physical disk port values are
1
or
2
. You must put brackets ([ ]) around the physical disk
channel values.
physicalDiskChannels Identifier number of the physical disk ports for which to
display information. Valid physical disk port values are
1
or
2
. You must put brackets ([ ]) around the physical disk
channel values.
allPhysicalDiskChannels The identifier that selects all of the physical disk ports.
Show Physical Disk Download Progress
This command returns the status of firmware downloads for the physical disks targeted by the
download
physicalDisk firmware
or
download storageArray physicalDiskFirmware
commands.
Syntax
show allPhysicalDisks downloadProgress
Parameters
None.
NOTE: When all firmware downloads have successfully completed, this command returns a
Successful
status.
If any firmware downloads fail, this command shows the firmware download status of each targeted physical disk.
This command returns the status values shown in the following table.
Status Definition
Successful Downloads completed without errors.
Not Attempted Downloads did not start.
Partial Download Downloads are in progress.
Failed Downloads completed with errors.
Show RAID Controller Module
For each RAID controller module in a storage array, this command returns the following information:
• Status (Online, Offline)
• Current firmware and NVSRAM configuration
• Pending firmware and NVSRAM configuration configurations (if any)
• Board ID
• Product ID
• Product revision
• Serial number
• Date of manufacture
• Date and time to which the RAID controller module is set
• Associated virtual disks (including preferred owner)
196