Dell PowerVault MD3060e Series, Cli Manual

Page: 193 / 226

Parameter
Parameter Description
diskGroup
Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
Show Disk Group Import Dependencies
This command shows a list of dependencies for the physical disks in a disk group that you want to move from one
storage array to a second storage array.
Syntax
show diskGroup [ diskGroupName ] importDependencies
[cancelImport=(TRUE | FALSE)]
Parameters
Parameter Description
diskGroup Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
cancelImport The setting to spin the physical disks back down after the
disk group dependencies have been read. To spin down
the physical disks, set this parameter to
TRUE
. To let the
physical disks stay spinning, set this parameter to
FALSE
.
NOTE: This command returns the dependencies of a specific disk group, which must be in an Exported state or a
Forced state. If a decision is made to retain the listed dependencies, then the
cancelImport
parameter can be
enforced to spin the physical disks back down. You must run the
show diskGroup importDependencies
command before you run the
start diskGroup import
command.
Show Disk Pool
This command returns information on the used and free capacity and other properties for the disk pool.
Syntax
show diskPool [ diskPoolName ]
Parameter
Parameter Description
diskPool The alphanumberic identifier of the disk pool (including –
and _) that you want to set to a Complete state. Enclose
the
diskPoolName in square brackets ([ ]).
Show Host Ports
For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
193