Dell PowerVault MD3060e Series, Cli Manual

Page: 165 / 226

Parameter Description
MM:DD:YY
, where
MM
is the month,
DD
the day and
YY
the year. For example:
endDate=11:26:11
.
noEndDate Use this option to prevent a scheduled copy-on-write
operation from ending. If you later decide to end the copy-
on-write operations, you must re-enter the create
snapshotVirtualDisk
command and specify an end
date.
timesPerDay Number of times you want the snapshot schedule to run in
a day. For example,
timesPerDay=4
.
timeZone Specifies the time zone to use for the scheduling
operations, using one of the following values:
•
GMT±HH:MM
—The offset from Greenwich Mean
Time (GMT), in hours and minutes. For example,
GMT-06:00 must be used to specify Central
Standard Time (CST).
•
Text string
—A standard time zone text
string, in quotation marks. For example, "USA/
Chicago" or "Germany/Berlin". Time zone text
strings are case sensitive. If an incorrect text
string is used, or no text string is specified, the
default time zone is GMT. For example, CST can
be specified in two different ways:
timeZone=GMT-06:00
or
timeZone="USA/Chicago
.
NOTE: To remove a schedule, use the
delete virtualDisk
command with the
schedule
parameter. The
delete
command with the
schedule
parameter deletes only the schedule, not the snapshot virtual disk. Ensure
that you do not inadvertently delete the virtual disk itself.
NOTE: If you also use the
scheduleInterval
option, the lowest value of the
timesPerDay
option and the
scheduleInterval
option is used. The value is determined by calculating an integer value for the
scheduleInterval
option. Divide 1440 by the
scheduleInterval
option value that you set. For example,
1440/180 = 8. This value is then compared to the
timesPerDay
integer value and the calculated
scheduleInterval
integer value; the smaller value is then used.
Set Disk Group
This command defines the properties for a disk group.
Syntax
set diskGroup [ diskGroupName ]
addPhysicalDisks=( enclosureID1,slotID1 enclosureID2,slotID2...
enclosureIDn,slotIDn )
raidLevel=(0 | 1 | 5 | 6)
owner=(0 | 1)
Parameters
165