Dell PowerVault MD3060e Series, Cli Manual

Page: 162 / 226

Parameter Description
file Specifies name of the file to which to save the
performance statistics. You must put quotation marks (" ")
around the file name.
Save Storage Array SAS PHY Counts
This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters,
run the
Reset Storage Array SAS PHY Baseline
command. See Reset Storage Array SAS PHY Baseline.
Syntax
save storageArray SASPHYCounts file=" filename "
Parameter
Parameter Description
file Specifies the file path and the file name to which you save
the SAS PHY counters. Enclose the file path and the file
name in double quotation marks (" "). For example: file="C:
\Program Files\CLI\logs\sasphy.csv"
This command does not automatically append a file
extension to the saved file. Any file name is acceptable,
but the .csv extension must be used.
Save Storage Array State Capture
This command saves the state capture to a file.
Syntax
save storageArray stateCapture file=" filename "
Parameter
Parameter Description
file
Name of the file to which to save the state capture. You
must put quotation marks (" ") around the file name.
Save Storage Array Support Data
This command saves the storage array support-related information to a file.
Support-related information includes:
• The storage array profile
• The Major Event Log information
• The NVSRAM data
• Current problems and associated recovery information
• The performance statistics for the entire storage array
• The persistent registration information and the persistent reservation information
• Detailed information about the current status of the storage array
• The diagnostic data for the physical disk
162