manualshive.com logo in svg

Dell PowerVault MD3060e Series, Cli Manual

The Dell PowerVault MD3060e Series is a high-performance storage solution designed for businesses seeking reliable data storage capabilities. To maximize its potential, it is crucial to have comprehensive knowledge about its hardware and software operations. Users can easily access the free hardware and software manual for the Dell PowerVault MD3060e Series, available for download at manualshive.com.

Share
Download
background image

Parameter

Description

NOTE: Using the 

allVirtualDisks

 parameter 

deletes virtual disks until all are removed or until an 
error is encountered. If an error is encountered, this 
command does not attempt to delete the remaining 
virtual disks.

virtualDisk or virtualDisks

Name of the virtual disk to delete. You can enter more 
than one virtual disk name. You must put brackets ([ ]) 
around the virtual disk name. If the virtual disk name has 
special characters, you must also put quotation marks (" ") 
around the virtual disk name.

removeDiskGroup 

Deleting the last virtual disk in a disk group does not 
delete the disk group. You can have a standalone disk 
group (minus any virtual disks). To remove the standalone 
disk group, set this parameter to 

TRUE

. To keep 

standalone disk groups intact, set this parameter to 

FALSE

.

schedule

Deletes only the schedule.

Delete Virtual Disk On A Disk Pool

This command deletes virtual disks on a disk pool.

CAUTION: All of the data in the virtual disk is lost as soon as you run this command.

Syntax

delete (allVirtualDisks |

virtualDisk [

virtualDiskName

] |

virtualDisks [

virtualDiskName1 ... virtualDiskNameN

]

[removeDiskGroup=(TRUE | FALSE)

retainRepositoryMembers=(TRUE | FALSE)]

Parameters

Parameter

Description

allVirtualDisks

This parameter deletes all of the virtual disks on a disk 
pool.

virtualDisk

 or 

virtualDisks

The name of the virtual disk that you want to delete. You 
can enter more than one virtual disk name. Enclose the 
virtual disk name in square brackets ([ ]). If the virtual disk 
name has special characters, you also must enclose the 
virtual disk name in double quotation marks (" ").

removeDiskGroup

Deleting the last virtual disk in a disk group does not 
delete the disk group. You can have a standalone disk 
group (minus any virtual disks). To remove the standalone 
disk group, set this parameter to 

TRUE

. To keep 

134

Summary of Contents for PowerVault MD3060e Series



































































































































































































































Reviews:

No comments

Related manuals for PowerVault MD3060e Series

3M Dynapro ET 3200 Series Getting Started Manual preview
Dynapro ET 3200 Series
Brand: 3M Pages: 23
Gateway DX4200-JB001A Hardware Reference Manual preview
DX4200-JB001A
Brand: Gateway Pages: 124
Igel UD9 Series Specifications preview
UD9 Series
Brand: Igel Pages: 2
IBASE Technology AMI400 Series User Manual preview
AMI400 Series
Brand: IBASE Technology Pages: 19
Alera ALE-AEWR2B Manual preview
ALE-AEWR2B
Brand: Alera Pages: 12
Acer Aspire Z800 User Manual preview
Aspire Z800
Brand: Acer Pages: 20
Acer AX3950-U2042 Buyer'S Manual preview
AX3950-U2042
Brand: Acer Pages: 3
Acer Aspire Z5610 Series Specifications preview
Aspire Z5610 Series
Brand: Acer Pages: 2
Acer AX3200-B3530A Buyer'S Manual preview
AX3200-B3530A
Brand: Acer Pages: 4
Acer Aspire ZC-602 User Manual preview
Aspire ZC-602
Brand: Acer Pages: 52
Acer Chromebase CA24I2 User Manual preview
Chromebase CA24I2
Brand: Acer Pages: 31
Acer Aspire Z1220 User Manual preview
Aspire Z1220
Brand: Acer Pages: 29
Acer Aspire Z5600 Series User Manual preview
Aspire Z5600 Series
Brand: Acer Pages: 32
Acer AX3910-U2032 Buyer'S Manual preview
AX3910-U2032
Brand: Acer Pages: 3
Acer Extensa E420 Service Manual preview
Extensa E420
Brand: Acer Pages: 91
Acer Aspire XC600 Service Manual preview
Aspire XC600
Brand: Acer Pages: 110
Acer Aspire X3812 Service Manual preview
Aspire X3812
Brand: Acer Pages: 108
Acer Aspire X3950 Service Manual preview
Aspire X3950
Brand: Acer Pages: 108

Brands by name

Popular brands

Load more brands