Dell PowerVault MD3060e Series, Cli Manual

Page: 143 / 226

Parameter Description
diskPool The alphanumeric identifier (including - and _) of the disk
pool that you want to place in the Security Enabled state.
Enclose the disk pool identifier in square brackets ([ ]).
Notes
All of the physical disks that comprise the disk pool must be security capable.
Enable RAID Controller Module Data Transfer
This command revives a RAID controller module that quiesces while running diagnostics.
Syntax
enable controller [(0 | 1)] dataTransfer
Parameter
Parameter Description
controller RAID controller module that you want to revive. Valid RAID
controller module identifier values are
0
and
1
. The
identifier value is
0
for the RAID controller module on the
top and
1
for the RAID controller module on the bottom
when viewed from the rear of the enclosure. You must put
brackets ([ ]) around the RAID controller module identifier.
If you do not specify a RAID controller module, the storage
management software returns a syntax error.
Enable Storage Array Feature
This command enables a premium feature using a feature key file.
Syntax
enable storageArray [featurePack | feature]
file=” filename ”
Parameter
Parameter Description
file File path and file name of a valid feature key file. Valid file
names for feature key files must end with a .key extension.
You must put quotation marks (" ") around the file path and
file name.
Additional Information
A feature pack is a predefined set of premium features, such as Storage Partitioning and Remote Replication. These
premium features are combined for the convenience of the users.
A premium feature is an additional application to enhance the capabilities of a storage array.
NOTE: Before you enable the High Performance Tier premium feature, stop all host I/O operations to the storage
array. When you enable the High Performance Tier premium feature, both RAID controller modules in the storage
array immediately reboot.
143