manualshive.com logo in svg

Dell PowerVault MD3060e Series, Cli Manual, Page: 140 / 226

Share
Download
Dell PowerVault MD3060e Series Cli Manual Download Page 140

download firmware on all of the physical disks in the storage array. See Download Storage Array Physical Disk 
Firmware.) This command blocks all I/O activity until the download finishes or fails. The download returns one of the 
following statuses:

•

Successful

•

Unsuccessful With Reason

•

Never Attempted With Reason.

This command is used to download a firmware image to only one physical disk at a time. If you use this command in a 
script, ensure that you use this command only once. If you use this command more than once, the operation may fail. 
You can download firmware images to all of the physical disks in a storage array at one time by using the 

Download 

Storage Array Physical Disk Firmware

 command.

Syntax

download physicalDisk [enclosureID,slotID]

firmware file="

filename

"

Parameters

Parameter

Description

physicalDisk

Physical disk to which to download the firmware image. 
Specify the enclosure ID and slot ID for the physical disk. 
Enclosure ID values are 

0

 to 

99

. Slot ID values are 

0

 to 

31

. You must put brackets ([ ]) around the enclosure ID 

value and slot ID value.

filename

File path and file name of the file that contains the 
firmware image. You must put quotation marks (" ") around 
the firmware image file path and file name.

Download Storage Array Firmware/NVSRAM

This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array. 
If you want to download only NVSRAM values, use the 

downLoad storageArray NVSRAM

 command.

Syntax

download storageArray firmware [, NVSRAM] 

file="

filename

" [, "

NVSRAM-filename

"] 

[downgrade=(TRUE | FALSE)] 

[activateNow=(TRUE | FALSE)]

Parameters

Parameter

Description

NVSRAM

Specifies that you want to download a file with NVSRAM 
values when you download a firmware file. You must not 
put brackets around this parameter. Include a comma 
after the term firmware.

file

File path and name of the file that contains the firmware. 
Valid file names must end with a .dlp extension. You must 
put quotation marks (" ") around the file name.

140

Summary of Contents for PowerVault MD3060e Series



































































































































































































































Reviews:

No comments