manualshive.com logo in svg

Dell PowerVault MD3060e Series, Cli Manual, Page: 216 / 226

Share
Download
Dell PowerVault MD3060e Series Cli Manual Download Page 216

None.

Stop Disk Pool Locate

This command turns off the indicator lights on the physical disks that were turned on by the 

start diskPool 

locate

 command.

Syntax

stop diskPool locate

Stop Enclosure Blink

This command turns off the indicator LED on the enclosure that was turned on by the 

start enclosure blink 

command.
Syntax

stop enclosure blink

Parameters
None.

Stop Physical Disk Blink

This command turns off the indicator light on the physical disk that was turned on by the 

start physicalDisk 

blink

 command.

Syntax

stop physicalDisk blink

Parameters
None.

Stop Physical Disk Channel Blink

This command turns off the indicator lights on the expansion enclosures that were turned on by the 

start 

physicalDiskChannel blink

 command.

Syntax

stop physicalDiskChannel blink

Parameters
None.

Stop Physical Disk Channel Fault Isolation Diagnostics

This command stops the physical disk port fault isolation diagnostics, which stops the 

start physicalDisk 

channel fault isolation diagnostics

 command before it completes.

Syntax

stop physicalDiskChannel faultDiagnostics

Parameters
None.

216

Summary of Contents for PowerVault MD3060e Series



































































































































































































































Reviews:

No comments