Model:
CF-17/CF-M34
Series
Supplementary Instructions for Windows
®
9 8
P e r s o n a l C o m p u t e r
®
This manual contains supplementary instructions regarding the use of the computer. It explains the cases
where the operation of the computer differs from that in the Operating Instructions.
First-time Operation
“ O P E R A T I N G I N S T R U C T I O N S
( p a g e 9 )
”
Replace the first "NOTE" for the following. “OPERATING INSTRUCTIONS (page 10)”
N O T E
The power saving mode ([Power Scheme] in [Control Panel] - [Power Management]) is
factory set, so if there is no input from a key, the touch pad, the touchscreen or an
external mouse (when one is connected) for a certain interval of time, the power to the
LCD and hard disk is shut down.
The LCD will resume operation when the touch pad or the touchscreen is used, or
a key or an external mouse is pressed.
The power to the LCD may be turned off while Windows is setting up or even when
an application software is being installed. In this case, because it is conceivable that a
selection dialog box will be shown, do not press the
Enter
key to attempt to
resume from this condition as doing so may trigger a selection, but instead, press a
key unrelated to the direct triggering of a selection, like the
key.
*With Windows 98, "Suspend" is called "Standby".
Shift
P r o d u c t R e c o v e r y C D - R O M
R e g i s t r a t i o n C a r d
W i n d o w s 9 5 S y s t e m P a c k ..... 1
W i n d o w s
®
9 5 B o o k
Replace the inclusion for the following. “OPERATING INSTRUCTIONS (page 9)”
P r o d u c t R e c o v e r y C D - R O M
R e g i s t r a t i o n C a r d
W i n d o w s 9 8 S y s t e m P a c k ..... 1
W i n d o w s
®
9 8 B o o k
1
