DATREND Systems ES601 Plus, Operating Manual

Page: 177 / 233

ES601 Plus OPERATING MANUAL
Fig u re 93
‘Pass’ Indication
On the right side of the list of test reports that have been downloaded is a column labelled ‘Pass’. If
this column contains a green check mark, then all components of the test have been given a pass
indication during the test on ES601
Plus
. If a red X is in this column, one or more components in
this test report have a fail indication. This provides an indication to the user the test report should
probably be reviewed more closely to determine the causes of the failure(s).
‘New’ Indication
Next to the ‘Pass’ column is a ‘New’ column. If this column contains a ‘dot’ for any given record,
this is an indication the Device Info for this test record has been modified by the test technician.
This can be an indication the device tested is new (the control number was not in the Equipment
Record system of ES601
Plus
), or it may mean additional data was entered on the Device Info
screen during a test (Tech Code, Facility, Location, etc.). This provides an indication to the user the
Device Information should be reviewed. Some Device Info will appear on the screen directly if data
is available (Description, Make or Model).
8.7.2 Searching For Test Reports
In the main window, there is a search text box in the upper right hand corner. Use this to filter the
Test Record results by Parent ID, Device ID, Description, Make, and Model. The search is real-
time, so results will display as the characters are typed into the search box. To cancel a search, press
ES601pc Software/Chapter 8
#
Page 158