Getting Started
Network Camera
Model No.
BL-C1
Please read the Important Information manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the camera's features.
•
The Setup CD-ROM provides Getting Started in the following languages:
English, French, German, Italian, Spanish, Russian, Chinese and Korean.
•
If you cannot complete the setup, see the Troubleshooting manual on the
Setup CD-ROM.
2006 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX14952ZA
KK0206YR0 (CE)
Indoor Use Only
Trademarks
•
Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
•
Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•
Screen shots reprinted with permission from Microsoft Corporation.
•
All other trademarks identified herein are the property of their respective owners.
•
This software is based in part on the work of the Independent JPEG Group.
Abbreviations
•
UPnP is the abbreviation for "Universal Plug and Play".
•
"Network Camera" is called "Camera" in this manual.
•
"Setup CD-ROM" is called "CD-ROM" in this manual.
1.
Connect the camera to your router.
Router
(Customer-provided)
WAN
4
3
2
1 LAN
•
Confirm that the indicator lights green after about
1 minute.
•
When you operate the camera, the power outlet
should be near the camera and easily accessible.
•
Use only specified Panasonic AC adaptor (Order
No.PQLV206CEY [for use in countries/areas other
than the United Kingdom], PQLV206EY [for use in
the United Kingdom]).
•
If the indicator does not light green, see page 3
and 4 of Troubleshooting on the CD-ROM.
•
The camera may become warm. This is not a
malfunction.
The indicator
lights green.
AC adaptor
To the power outlet
Ethernet cable
(Straight Cat5 cable,
Customer-provided)
Modem
Internet
PC
(For setup and display)
(Customer-provided)
Connect the Ethernet cable (customer-
provided) to the camera and the router.
The PC should be connected to the router and then to the Internet in advance.
Plug the AC adaptor into the power outlet.
Connect the AC adaptor cord to the DC In
jack.
