Getting Started
Network Camera
Model No.
BL-C10
1.
Check the included accessories.
The following items are provided with the camera.
3.
Connect the camera to your router.
Connect the camera to your router with an Ethernet
®
cable to set up the camera.
2.
Check the system requirement for
your PC.
Your PC (Personal Computer) and network must meet the following tech-
nical specifications for the camera to work properly.
Main Unit
. . . . . . . . . . . . . . . . . . 1 pc.
AC Adaptor
. . . . . . . . . . . . . 1 pc.
Order No.: PQLV202X
(Cord Length: About 3 m [9.84 feet])
Setup CD-ROM
. . . . . . . . . . 1 pc.
Order No.: PSQX3601ZCD
(Operating Instructions, Installation/
Troubleshooting, Getting Started,
Setup Program, Network Camera
Recorder Trial Version)
Screws
. . . . . . . . . . . . . . . . . . . 2 pcs.
Order No.: PQHE5004Y
Washers
. . . . . . . . . . . . . . . . . .2 pcs.
Order No.: XWG35FJ
Please read the Installation/Troubleshooting manual before using.
This Getting Started explains how to connect, set up and mount the
camera. See the Operating Instructions on the Setup CD-ROM for
details about the camera features.
•
If you cannot complete the setup, see the Troubleshooting section of
the Installation/Troubleshooting manual.
Trademarks
•
Adobe and Acrobat are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
•
Ethernet is either a registered trademark or a trademark of Xerox Corporation
in the United States and/or other countries.
•
Microsoft, Windows, and ActiveX are either registered trademarks or trade-
marks of Microsoft Corporation in the United States and/or other countries.
•
Pentium is a trademark or registered trademark of Intel Corporation or its sub-
sidiaries in the United States and other countries.
• Screen
shots reprinted with permission from Microsoft Corporation.
•
All other trademarks identified herein are the property of their respective owners.
Abbreviations
•
UPnP
is the abbreviation for Universal Plug and Play.
•
"Network Camera" is called "Camera" in this Getting Started.
4.
Turn the camera on.
Inserting the AC plug of the AC cord to the outlet powers up the camera.
After you let the Ethernet
cable through the hole, attach
the cable cover to the camera.
• See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/
for the latest information
about web browser.
Push the cable cover to the left, let go
of the tab from the unit, and pull it.
Connect the Ethernet cable to your
router.
Connect the Ethernet cable to the camera.
Connect the power cord from
the AC adaptor to the DC IN
jack.
After the lens moves (pan/tilt
operation), confirm that the indi-
cator lights green after a minute.
• If the indicator does not light green,
see page 16 and 17 of the Installation/
Troubleshooting.
• A noise can be heard during pan/tilt
operation. This is normal.
Operating
System
CPU
Protocol
Interface
Web Browser
Item
Description
Microsoft
®
Windows
®
XP, Microsoft
®
Windows
®
2000,
Microsoft
®
Windows
®
Me, Microsoft
®
Windows
®
98SE
Pentium
®
III
(500 MHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100 Mbps network card installed
Internet Explorer 6.0 or later (Not included on the Setup CD-ROM)
Installation/
Troubleshooting
. . . . . . . . . 1 pc.
Getting Started
(This manual)
. . . . . . . . . . . .1 pc.
AC Cord
. . . . . . . . . . . . . . . . . . . 1 pc.
Order No.: PFJA02A006Z
Push the cable cover to the left,
let go of the tab from the unit.
Pull.
1
2
To a LAN port of your router
To your Modem
To your PC
To the outlet
Ethernet cable
(Straight Cat5 cable)
(Customer-provided)
Ethernet cable
(Straight Cat5 cable)
(Customer-provided)
To the Ethernet (LAN)
port of the camera
To your router
Power Cord
To the DC IN jack of
the camera
To the router
AC cord
AC adaptor
To the power outlet
To the camera
Attach the cable cover letting
the Ethernet cable through the hole.
• These instructions assume your PC is already connected to the Internet and your home network includes a router that is UPnP
TM
(Universal Plug and Play) compliant.
• The camera will be connected to your router using a "straight" Cat5 network cable (customer-provided).
•
The Setup CD-ROM provides Getting Started in the following languages:
English, French, German, Italian, Spanish, Russian and Chinese.
Caution:
The AC cord is used as
the main disconnect device, ensure
that the socket-outlet is located/
installed near the equipment and is
easily accessible.
•
Before you begin the installation, the UPnP
TM
feature in your router needs to be enabled. Usually, the default setting disables this feature.
For more info, please visit, http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.
Connect the AC plug of the
AC cord to the power outlet.
• Use only specified Panasonic
AC adaptor PQLV202
(Order No.PQLV202X).
The indicator
lights green.
2004 Panasonic Communications Co., Ltd. All Right Reserved.
PSQX3327YB
KK0904RM2115 (CE)
