DATREND Systems ES601 Plus, Operating Manual

Page: 105 / 233

ES601 Plus OPERATING MANUAL
Buttons provided by the TEST RECORD display are:
ESCAPE:
Returns to the MANUAL MODE menu.
OUTPUT
REPORT: Enters the REPORT OUTPUT menu, which allows a formatted report
of the test results to be printed via the Printer Port or RS-232 Port of
ES601
Plus
.
PREV PAGE:
If more than one screen of data exists, the
PREV PAGE
button appears
and allows backward scrolling through the Record.
NEXT PAGE: Scrolls to the next available page of data in the Record.
Pressing
NEXT PAGE
will advance through each page of data stored in the Record. Depending on
the safety standard used in testing, and the testing conditions chosen, the first several pages of the
Record will consist of safety test results. If the DUT provided a full complement of ten patient-
applied parts organized as five functional groups of leads, there may be up to 18 pages of safety test
results in the Record, where the latter 15 pages will list values recorded for patient and auxiliary
leakage tests. This represents are large volume of data, however, such recording and reporting of
results is a mandatory requirement of the IEC60601 standard. Other standards, such as IEC62353,
do not require as many safety measurements and therefore produce far shorter reports than tests
performed according to IEC60601.
Leakage results follow the page of PE test results. For IEC60601 and AAMI-ES1 standards, the first
page of leakage results will list the earth leakage and touch current or enclosure measurements (see
example following). For IEC62353 and VDE0751 standards, this page will show device leakage
results. For all types of leakage measurement under any safety standard, the Test Record reports the
testing conditions in mnemonic form, as follows:
NP Normal supply polarity
RP Reversed supply polarity
NC Normal condition
SF Single-fault condition
L2O Supply line 2 (neutral) open
EO Protective earth (ground) open
MAP Mains on applied part(s)
Manual Testing/Chapter 5
#
Page 86