Daedong Kioti RX6020 Manual Download

Page: 131 / 262

description oF operating system

T46w030A

always maintain the proper tire in-

flation pressure. make sure the tire

pressure does not exceed the pres-

sure recommended in the manual.

INFlATION PRESSuRE

Class

Tire Sizes

Inflation

Pressure

Front

9.5-20/8pr:Usa

11.2x20/8pr:aU/eU

34.1psi

(2.4kg/cm

)

rear 14.9-28/8pr: Usa

14.9x30/8pr: aU/eU

25.6psi

(1.8kg/cm

)

Keep the front tire pressure to

maximum when using the front

end loader or front suitcase

weights.
if tires with a different size from

the ones already in use are in-

stalled, contact the

KIOTI

dealer

for the front/rear wheel speed

ratio. improper front/rear wheel

speed ratio can result in exces-

sive wear of the tires.

•

NOTE

T46w031A

Do not weld or apply heat to the

tire rim or disc. The tire can

explode due to the rapidly in-

creased pressure in the tire.

Check tires for inflation pres

sure, damage, deformation,

and excessive wear on lug and

damage of rim and disc. Also

check if wheel bolts, rim bolts,

and nuts are loose.

•

wARNING

T46w030A

※

this pressure is based on agriculture tire.

The tire rims can fall out of the

tires. Causing the tire bead

edge to blow out. Therefore,

stay out of their way when

checking or inflating tires.

•

wARNING

TF110(RX7320)ROPS합본-US,EU,AU-04.59 59

2016-06-07 오후 7:17:57

Summary of Contents for Kioti RX6020







































































































































































































































































Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands

Daedong Kioti RX6020, Manual

Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands