Daedong Kioti RX6020, Manual

Page: 212 / 262

7
-
2
rx6020 / rx6620 / rx7320 / rx7620
BlEEDING fUEl lINEs (T2)
(1) Drive pump (2) air plug
1. make sure that the amount of fuel
in the fuel tank is sufficient.
2. if air is if produce in the pre-filter
or main filter, unscrew its bleeding
bolt (2), illustrated above, and turn
the ignition switch to run the start
motor. Then, air in the fuel filter is
bled through the bleeding bolt as
shown in the figure above.
Never bleed the fuel system
while the engine is hot.
•
CAUTION
T11O757A
Avoid running the start motor
for over 5 consecutive sec-
onds, but run it several times
at shorter intervals.
•
CAUTION
Bleeding is not necessary if in-
stalling the fuel port after fueling.
•
NOTE
3. when fuel is visible from the bleed-
ing bolt, tighten the bolt and start
the engine.
Keep the following instructions
to protect the catalytic filter:
Make sure to use only ap -
proved fuel.
Keep the engine oil change
schedule.
Check the engine oil amount
frequently and keep its level to
the specification.
Avoid unnecessary idling of
the engine.
•
•
•
•
IMPORTANT
Do not use any engine oil or
fuel additive except Polar D +
Diesel power additives.
Avoid driving for an extended
period of time with any warn -
ing lamp illuminated.
Make sure that any flammable
material, such as dry grass or
paper, gets to the catalytic fil -
ter while parked.
•
•
•
IMPORTANT
Keep the following instructions
to protect the catalytic filter:
Never stop the engine during
driving.
Never place the shift lever
in the neutral position on a
downhill.
•
•
IMPORTANT
TF110(RX7320)ROPS합본-US,EU,AU-07.24 24 2016-05-10 오전 8:50:53