Daedong Kioti RX6020 Manual Download Page 109

Page: 109 / 262

description oF operating system

hAND ThROTTlE lEvER

(1) hand throttle lever

: "slow"

: "Fast"

M55O4M2A

the hand throttle lever is to control

the engine rpm. the engine accel-

erates to its full speed by pushing

the hand throttle lever ( position)

completely out while pulling the

lever ( position) decelerates the

engine.
the hand throttle lever is mainly

used while working in a field.

Do not use the hand throttle

lever while driving on public

highways. Otherwise it can

lead to an accident as it be-

comes hard to decelerate the

tractor rapidly.

•

CAUTION

FOOT ThROTTlE

(1) Foot throttle

(a) depress

M55O4E9A

the foot throttle is mainly used dur-

ing driving on a road while the hand

throttle lever is mainly used in work

field.

TF110(RX7320)ROPS합본-US,EU,AU-04.37 37

2016-06-07 오후 7:17:40

Summary of Contents for Kioti RX6020







































































































































































































































































Search results

Summary of Contents for Kioti RX6020

Reviews:

Daedong Kioti RX6020, Manual, Page: 109 / 262

Search results

Summary of Contents for Kioti RX6020

Reviews: