Daedong Kioti RX6020 Manual Download

Page: 44 / 262

RX6020 / RX6620 / RX7320 / RX7620

filters

H11O205A-1

filters for the engine, transmission,

air cleaner, and A/C are consum-

able that purify oil and air. Make sure

to replace the these items when

changing oil.

no.

Part no

descriPtion QtY

1 E6201-32443

Engine Oil filter

2 T4620-38032

hydraulic filter

3 f6800-16111

pre fuel filter

4 f6800-16403

Main fuel filter

5 E7230-11081

Air Cleaner filter

H11O204A

Various oils and fluids are used in this

tractor for operation, lubrication, cool-

ing, and anti-corrosion of various parts.

If oil or fluid is insufficient, contami

nated or degraded, it can cause poor

performance, faulty operation, and

seized parts on the tractor, leading to

malfunctions.
Regularly add or change the fluid

specified on the right to keep the

tractor in perfect condition.

essential rePlacement Parts

oils and fluids

no.

item

sPecification

caPa

re-

marK

u.s.gal.(l)

1 Engine oil

Tier2 or 3 (without dpf) - ApI Ch grade above

Tier4 (with dpf) - ApI CJ grade above

SAE10W30 / SAE10W40 / SAE15W40

2.2 (8.3)

with filter

2.3 (9.0)

Trans-

mission

fluid

dAEdONg UTf55

Exxonmobil Mobilfluid424

Bp: Tractran UTh

Exxonmobil hydraulic560

Shell: donax Td

15.9 (60)

front

axle case

SAE90 oil and the same level or above,

or TM

2.2 (8.5)

grease

SAE multi purpose type grease

SAE 90 level more than

or TM oil and the same

5 Antifreeze fresh clean water with ethylene glycol (50:50)

2.5 (9.5)

TF110(RX7320)ROPS합본-US,EU,AU-02.4 4

2016-06-07 오후 7:08:13

Summary of Contents for Kioti RX6020







































































































































































































































































Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands

Daedong Kioti RX6020, Manual

Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands