Daedong Kioti RX6020 Manual Download

Page: 126 / 262

rx6020 / rx6620 / rx7320 / rx7620

hEATER AND AIR CONDITIONER

M55O4J4A

the air conditioner should be operated with the engine running.

(1) Fan speed control dial

(2) vent mode control dial

(3) temperature control dial

(4) air conditioner switch

wARNING

Do not leave a child alone in the cabin. his/her health can be threatened

as internal temperature rises rapidly in hot weather or on a sunny day.

use the fresh air mode in normal conditions and use the air recir-

culation mode only if necessary. Continued operation of the air

recirculation mode can cause the inside to become stuffy, causing

headaches, drowsiness, or frost on the windows. Do not operate the

recirculation mode for an extended period of time.

•
•

wARNING

H11O493A

the fan speed for the heater and air

conditioner can be adjusted in four

positions.

FAN SPEED CONTROl DIAl

TF110(RX7320)ROPS합본-US,EU,AU-04.54 54

2016-06-07 오후 7:17:54

Summary of Contents for Kioti RX6020







































































































































































































































































Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands

Daedong Kioti RX6020, Manual

Search results

Summary of Contents for Kioti RX6020

Reviews:

Related manuals for Kioti RX6020

Brands by name

Popular brands