CyberOptics SE505, Hardware Manual

Page: 26 / 180

Chapter 2 : System Overview
16 SE505 Hardware Manual
SE505 Rear View
System connections such as power, air, and I/O are accessed at the rear of the machine as shown
in Figure 19 and shown below.
Table 2. SE505 System Components
Component Description
AC Main Circuit Breaker
(CB1) The AC main circuit breaker is located on the rear electrical panel;
AC power is connected to the circuit breaker through the rear
electrical panel and turns off all system power when activated.
Note: Do not obstruct the rear circuit breaker
Air Regulator Regulates compressed air for pneumatic control of the conveyor lift
and clamp.
Cooling Fans Draw air out of the system to cool internal electronics
Digital Input/Output
Connector Connection for an external device such as a separate conveyor.
Ethernet Port Connection to local area network (10/100 Mb Fast ethernet network
configurations).
SMEMA Connectors Connection for upstream and downstream equipment for conveyor
control.
Serial Connector Connection for serial devices such as barcode reader.