CyberOptics SE505, Hardware Manual

Page: 28 / 180

Chapter 2 : System Overview
18 SE505 Hardware Manual
SE505 Internal Parts
Opening the hood, which stops all machine motion, gives you access to the sensor, gantry and
conveyor. The lower panel can be removed (by service personnel only) to gain access to internal
electrical components. These parts are described below and shown in Figure 20.
Table 3. SE505 System Internal Components
Component Description
Processor The processor contains two Intel

5000X chipset, Quad-Core 2.0
GHz CPU, three SATA 250GB hard drives (or better) and one
DVD +/- R/W drive.
It provides serial, USB, Ethernet, CANOpen, and CameraLink
Framegrabber connections.
Software configuration is Windows XP

Professional, 64-bit platform.
Conveyor The conveyor brings the panel into the machine, clamps it, and
positions it for inspection. During inspection, the gantry moves as
needed in the X and Y directions, and the Z stage adjusts for height
while the panel remains stationary. The conveyor automatically
adjusts to the width of the panel as specified in the SRFF.
Digital I/O Controller The Digital I/O controller uses programmable logic to control
conveyor motion.
Gantry Moves the sensor along the X and Y axes during inspection.
Main Electrical Panel Contains the electronic components needed to power the system
and control motion.
Sensor Measures the height, volume, and area registration, bridging of the
solder pads defined for a given location. The gantry moves along
both the X and Y axes and the Z stage moves the sensor vertically to
keep it in focus.