CyberOptics SE505, Hardware Manual

Page: 20 / 180

Chapter 1 : Safety
10 SE505 Hardware Manual
Electrical Safety Labels
●
The AC input rating label is located on the back electrical panel.
Figure 11. AC Input Rating Label
●
A hazardous voltage label is located on the processor power connector on the main electrical
panel. The label text says:
WARNING! LINE VOLTAGE PRESENT WITH MAIN DISCONNECT OFF.
Risk of electric shock or burn.
Turn off main breaker before servicing.
Figure 12. Hazardous Voltage Label
●
The ESD earth ground label is located near the ESD grounding plug on the outside of the
system.
Figure 13. ESD Earth Ground Label
●
The protective earth ground label is located near the PE terminal on the inside of the system
at the back electrical panel and gantry grounding plate.
Figure 14. Protective Earth Ground Label
●
The lockout label is located at the rear of the machine above the AC main circuit breaker.
Figure 15. Lockout Label
LINE VOLTAGE PRESENT WITH
MAIN DISCONNECT OFF.
Risk of electric shock or burn.
Turn off main breaker before
servicing.
WARNING