CyberOptics SE505, Hardware Manual

Page: 15 / 180

CyberOptics Corporation 5
Safety Guidelines
Safety Interlocks on the Top Cover
The SE505 is equipped with a safety interlock switch on the top enclosure (hood). The safety
interlock key is located on the top cover. When the safety interlock is engaged, all motion in the
system stops.
When the hood is not securely closed or the switch is defeated in another way (such as putting
the key in the switch) all machine motion is disabled.
➢
To reengage the safety interlock switch
1. Remove the key from the switch, if applicable.
2. Close the safety enclosure securely.
3. Press the yellow E-Stop Reset to reengage the system.
Figure 4. Location of safety interlock switch
Caution: It is recommended that the machine should only be run in this way by a trained
technician.
Safety interlock key
Safety interlock switch