CyberOptics SE505, Hardware Manual

Page: 30 / 180

Chapter 2 : System Overview
20 SE505 Hardware Manual
Main Electrical Panel
The Main Electrical Panel in the SE505 contains the electronic components described in the
following table and shown in Figure 21.
Table 4. Main Electrical Panel Components
Component Description
Middleman PCB Assembly Collects encoder and sensor information and transfers it
to the processor for analysis.
Servo Amps for X, Y, and Z stages Provide feedback and fine tuning for stage movement.
Motor Controllers for Conveyor
Autowidth and Conveyor Belts (2) Controls belt and autowidth motors for conveyor motion.
Power Supply 24VDC, 5 Amp
Power Supply 24VDC, 3.5 Amp Provide power and auxiliary power to the sensor and
electronics in the system.
Circuit Breakers:
CB2
CB3
CB4
CB5
CB6
CB7
CB8
Processor Outlet (6 Amp)
PS 1 (6 Amp)
PS 2 (6 Amp)
PS 3 (6 Amp)
X-Axis Servo (10 Amp)
Y-Axis Servo (10 Amp)
Monitor Outlet (6 Amp)
Safety Contactor and Safety Relay Allow power to the system only when interlocks are
closed and E-Stop and/or Power Switch are not pressed.