CyberOptics SE505, Hardware Manual

Page: 21 / 180

CyberOptics Corporation 11
Safety and Conformity Labeling
Manufacturing Information Conformance
The system has two Manufacturing Information and Conformance labels: one is located on the
outside of the machine on the lower right side; a second label is located at the rear of the machine
next to the rear fans.
The label shows the system compliance with European Conformity (CE), UL and RoHs
requirements. In addition, a printed EU Declaration of Conformity is shipped with each system.
If a new copy is required, contact CyberOptics Customer Service (See “Technical Support” on
page ix.).
Figure 16. Manufacturing Label
SOLDER PASTE
INSPECTION
SYSTEM
Part No:
Serial No:
Date:
Protected by U.S. 6, 115,491,
U.S. 6,385,335, U.S. 6,549,647,
U.S. 6,557,405, U.S. 6,593,705,
U.S. 6,750,899, GB 2,374,194,
GB 2,375,233, GB 2,375,392 and
other pending patents, U.S. and
foreign
NO. 21, UBI ROAD 1,
#02-01,
SINGAPORE 408724
+65-6744-3021