![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493028.webp)
28 – Cricket Robot Documentation
Qty.
Location
Description
2
C10, C12
22uf Electrolytic Capacitor
1
Q1
Transistor
Install C10 and C12 which are 22uf capacitors. Be sure to insert them with the “-” on the
part so that it lines up with the hole labeled with a “-”. There is no “+” marking on this part.
Solder and then clip the excess lead length.
Install transistor Q1 making sure the rounded side matches the silkscreen on the PC
board. You will have to slightly spread the leads and make sure the transistor is close to
the board as shown below. Solder and then clip the excess lead length.
Summary of Contents for Arduino Walking Robot
