To parents/guardians
Electronic products can lead to a fire or personal injury if not used under
safety instructions.
This leaflet contains important instructions to prevent accidents. Please read the instructions carefully
and use this product safely. Please keep this leaflet handy for future reference.
FCC CAUTION
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation.
WARNING:
This transmitter must not be co-located
or operated in conjunction with any other
antenna or transmitter.
For question regarding your product or for
the Sony Service Center nearest you, call
1-866-935-7669 in the United States.
Declaration of Conformity
Trade Name : SONY
Model : EKV-250B
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, CA
92127 U.S.A. Telephone Number : 1-858-
942-2230
Caution Exposure to radio frequency
radiation
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio
frequency (RF) Exposure Guidelines. This
equipment has very low levels of RF
energy that is deemed to comply without
maximum permissive exposure evaluation
(MPE).
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the
equipment and receiver.
--Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
