![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493006.webp)
6 – Cricket Robot Documentation
causes Cricket to stop and hold his last position. Mute which is in the center of the round
volume and channel area causes Cricket to stop and center his legs.
IMPORTANT:
If the remote fails to work, you may need to reset the remote operation
code. Use the following instructions for your remote. These instructions are also on the
battery door of your remote. If you have an older remote, the code may be different but
the instructions are the same.
The code is
0972
for GE 4 Device Remote (24993) as shown to the right.
To Reprogram for CRICKET:
Press and release the TV button.
Press and hold the setup button until the LED lights.
Then key in the three-digit code
0972
and the red LED will go out.
Summary of Contents for Arduino Walking Robot
