![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493075.webp)
75 – Cricket Robot Documentation
Remove the center servo
which was installed with just
two screws. Add the horn
adapter installing it in the most
vertical position you can find.
Once the adapter is in
position, add the horn. The
serrations should be facing in
and mesh with serrations on
the adapter which keep it from
sliding around. Line up the
bottom edge of the horn with
the adapter and screw the
assembly in place with a #1
Phillips screwdriver.
Reinstall the center motor
by tipping it through the
motor mount and inserting
the rivet and screw bearing
point through the center
keyhole.
Summary of Contents for Arduino Walking Robot
