![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493037.webp)
37 – Cricket Robot Documentation
Glue the bellows to each leg
on the underside near the
leg elbow on all 6 legs.
Note:
The bellows are
cosmetic. They give the
legs the appearance of
having hydraulic cylinders. If
you don’t like them, they
may be left off or attached
in a different spot.
All 6 legs complete with
rubber foot pads and
bellows. Note the
location of the bellows.
After the legs are dry,
you may remove the
screws used to align the
pivots.
Summary of Contents for Arduino Walking Robot
