![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493021.webp)
21 – Cricket Robot Documentation
A few seconds after the upload finishes, you should see the pin 13 LED on the board start
to blink (in red). If it does, congratulations! You've gotten Cricket Arduino up-and-running.
If you have problems, please see the
troubleshooting suggestions
.
You have programmed Cricket with a Sketch that only blinks the pin 13 LED. If you would
like to restore Cricket to his full operation, select the Cricket program from your CD under
“Software”. Select “Cricket_Arduino_1_0.ino. Do another download the same way you did
the “blink” download above. After the download, Cricket will straighten his legs and make
a couple of beeps. Your Cricket is now back to its normal operation.
Summary of Contents for Arduino Walking Robot
