![background image](http://html1.mh-extra.com/html/cricket/arduino-walking-robot/arduino-walking-robot_documentation_2685493047.webp)
47 – Cricket Robot Documentation
Apply a small amount of glue to
the mating surfaces and press
the retainers on each of the
Control Strips. Do not apply glue
to the inner notch which is where
the servo horn will ride.
This shows the Left Control Arm
with keyhole facing down.
Hole
Left Control Arm
Left Control Arm
Right Control Arm
This shows both the Right Control
Arm and the Left Control Arm. The
holes at the end of the slot face
outward.
Key holes facing outward
Summary of Contents for Arduino Walking Robot
