CPI Canada Inc.
Interfacing and Calibration
3
Millenia / Indico 100 Series Service Manual Ch # 740904-03 Rev. A
Page 3-1
CHAPTER 3
SYSTEM INTERFACING, PROGRAMMING,
AND AEC/ABS CALIBRATION
3.0.0 INTRODUCTION
3.1.0 Purpose
This chapter describes the interfacing to the generator of the X-ray room imaging equipment, and
programming of the Millenia and Indico 100 family of generators. This section allows the installer to record
the necessary information to complete the installation as well as to record the programming values. The
installation of the AEC (Automatic Exposure Control) and ABS (Automatic Brightness Stabilization)
devices and their calibration are also covered in this chapter.
This Chapter contains the following sections.
Section
Title
3A Setup
information.
3B System
interfacing
3C
Programming the generator
3D Automatic
Exposure
Control
(AEC)
calibration
3E
Automatic Brightness Stabilization (ABS) calibration