![background image](http://html1.mh-extra.com/html/cpi/indico-100-series/indico-100-series_service-and-installation-manual_2675023023.webp)
CPI Canada Inc.
Safety
1B
Millenia / Indico 100 Series Service Manual Ch # 740904-01 Rev. D
Page 1B-11
1B.6.5 Warning / Caution / Caution Label
This label is attached to a cover over the dual speed starter assembly (if fitted). DC bus voltage is present
behind this panel, see 1B.5.9.
Ensure that the generator has been turned OFF for five minutes before removing the cover or
disconnecting the DC supply.
Replace fuses with the same type and rating, refer to spares list (chapter 8) for details.
1B.6.6 Tank Vent Label
This label is attached to the HT tank clamping bracket on generator models equipped with an HT tank
vent screw. This screw must be loosened to allow venting of the HT tank before use of the generator
when the tank is so equipped.
The screw must be fully tightened to prevent insulating oil spills or leaks from the HT tank during
transportation or shipping.